粘合

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角必须精确和方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的—理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加颗粒增大的力和机理也用压片的粘合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗板的黏合剂同板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

Then they are carefully ironed flat.Second, the straw is woven and glued to card board backings according to the different colors and textures.

然后将其熨开，将编好的草编按不同颜色和质地粘合在木板上。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

The rubber to metal bonding mostly adopt sulphurate bonding.But if under sulphurating condition the bonding layer is unstable, or suppurating craft is difficult to come true，we adopt cold bonding.

橡胶与金属粘合大都采用硫化粘合方式,但当硫化条件下基材不稳定或硫化粘合工艺不易实现时则采用冷粘方式。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染色新的探索途径。