This is essentially a development of thoria dispersion strengthened nickel alloys.

这基本上是用二氧钍弥散强度镍基合。

All the "ear-needle"(ear-ring's wearing part) of alloy products, havegone through a professional prevent hypersusceptibility process.

所有合产品耳针都经过专业仿过敏处理。

Eight alloys were measured before and after tarnish by chromometer.

探讨低贵合变色因素。

Isrel businessman wants to import drainpipe, asbestus, and alluminum alloy material.

以色列商人求购排水管（三元乙丙橡胶制）、矿（石）棉、铝合材料。

Aluminum alloy shell, elegant, durable, heat eliminable.

铝合外壳，时尚，耐用，散热好。

The conversion film is probably constituted of amorphous and pored alloying tannate chelate.

这种转膜很可能是由有一定孔隙非晶态合单宁酸膜层构成.

Superelasticity is one of the most important properties of shape memory alloy (SMA).

摘要超弹性是形状记忆合(SMA)重要特性之一。

The microstructure deformation in the aging process of the alloy has been stated ,and the heteromorphy has been found the cause of the natural aging process of the 2011 alloy .

分析了工艺参数对合力学性能,阐述了合时效过程中微观组织变,找出了2011合自然时效进程缓慢原因是异质形核。

The process for brush plating mending of deeply scratched surface of LY12 duralumin alloy was introduced. The merits of the brush plating mending technology of LY12 duralumin alloy were discussed.

研究了电刷镀技术在LY12硬铝合零部件表面深度损伤修复中应用,提出了电刷镀修复LY12硬铝合零部件工艺流程及条件。

Cu-Sn alloy coating with different Sn content can be replacement plating out on iron and steel surface in a solution comprising of copper sulfate, stanous sulfate, complexant and stabilization agent.

铁件在由硫酸铜、硫酸亚锡、络合剂、稳定剂等组成溶液中,可以置换镀覆不同锡质量分数铜- 锡合镀层,其工艺可替代物预镀铜,消物污染,是实现电镀清洁生产措施之一。

Conclusion: Ni-Ti shape memory alloy stent is convenient and feasible in treating postoperative urethral stricture of hypospadia, and it has higher safety, small wound and definite curative effect.

镍钛记忆属支架管治疗尿道下裂术后尿道狭窄，是简便易行，安全性高，创伤小，疗效肯定治疗方法。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合去孪晶应力随着退火温度升高而升高，但是造成这一现象原因并不清楚。

The star cracks in macrostructure appear in some hypo-peritectic continuous cast alloy blooms and these cracks cannot be stuck completely by hot rolling reduction ratio,macroetching testing and SEM.

一些亚包晶合钢连铸大方坯出现低倍星状裂纹,在一定压缩比下经轧制仍不能完全消这种低倍缺陷。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合层是镀锡后在加热熔融处理过程中通过热扩散在基板与锡层之间生成一种属间合物,因此,合层生成与原板和镀层都有很大关系。

The metabolism of hydrogen which involved hydrogenase was the main reason for the MIC of AZ91 alloy.The SRB accelerated the cathodic reaction through the cathodic depolarization.

细菌代谢过程所导致电极阴极去极加速了镁合点蚀形成和发展。

Based on the principle of thermodynamics, the authors have made much calculation of the thermal effect caused from oxidation and generation of monodrome alloys and slag.

根据热力学原理，作者利用计算机计算功能，对大量单质合、炉渣氧热效应、生成热效应进行了计算。

In this paper,the mechanism of workpiece burn during grinding of casehardened steel and titanium alloys was studied by the use of SEM,EPMA,XPS and the metallograph analysis.

本文应用SEM,EPMA、XPS及相显微分析等技术研究了表面硬钢和钛合烧伤机理。

The Swedish tool steels react well to the blueing solution, the varying alloys in the steels react differently, thus giving me an array of interesting colors.

瑞典工具钢反应，以及向蓝溶液，不同合在钢中不同反应，从而给了我一个数组有趣色彩。

The dial shall be made of copper aluminum alloy, inalterable black numerals and graduation on white background. The manufacture of same will be to applicable standards.

仪表刻度盘应为机械指针式，应选用铜铝合材质，底色为白色，上面标数字和刻度为黑色（不易褪色），刻度分配应采用厂家提供标准。

Air hole, burnthrough, cooapse and welding crackle occurred in the fixed overhead weld for aluminium and aluminium alloy tubes, above all the small-size thin wall tube.

针对铝及铝合管,特别是小口径薄壁管固定口仰焊部位易出现气孔、烧穿、塌陷及焊接热裂纹等问题,分析问题存在原因,从焊接工艺方面入手,提出一套消气孔及烧穿操作手法。