It is only device to measure hemodynamic by the Inert Gas Rebreathing method.

唯一应用气吸法技术检测血流动力学及氧动力学的仪器.

He borrowed a mechanical book from me.

他从我这儿借了一本力学方面的书。

Further,new fundamental first and second laws of thermostatics and thermodynamics for continuum mechanics are presented.

提出了经典热力连续统力学的新的热静力学和热动力学的第一和第二基本定律。

Large totating machinery is one of the key equipments in national foundation establishment and industry.

大型旋转机械是国家基础设施和基础工业中关键的设备之一，旋转机械向着高速、高效发展，对旋转机械的动力特性、可靠性也提出了更高的要求，这些现实需要促进了转动力学的发展。

The microstructure deformation in the aging process of the alloy has been stated ,and the heteromorphy has been found the cause of the natural aging process of the 2011 alloy .

分析了工艺参数对合金力学性能的影响,阐述了合金时效过程中的观组织变化,找出了2011合金自然时效进程缓慢的原因是异质形核。

As a kind of effective medicine, Bao Jing Troche (BJT) has been done a lot of researches excBJT for the specialize of paruria, namely from the view of urodynamics.

保精片作为治疗慢性前列腺炎的良药，已经作了大量的研究，但尚未专门就其对慢性前列腺炎排尿异常症状的影响作研究，即尚未专门从尿动力学的角度研究慢性前列腺炎，本研究就是为此而设。

The purpose of the paper is to research the relation between meso-level structure and macromechanics characteristics of concrete and to popularize IEM, and to build a bridge between them.

本文旨在应用界面元方法研究混凝土的细观结构与宏观力学性能的关系，为混凝土力学性能的数值模拟及界面元的推广开辟新的途径。

The results indicated that argon plasma treatment had some effects on the mechanical properties of pylen nonwoven fabric, but had no effect on the application of pylen nonwoven fabric.

结果表明，通过氩气等表面活化处理，虽然会对无纺丙纶非织造物的力学性能造成影响，但是不会影响丙纶非织造物的使用。

The catalysts used to hydrogenate polymer containing polydiolefin units are introduced in this paper.The mechanism of SBS hydrogenation and the development of the kinetics are also referred to.

介绍了目前用于含聚双烯烃链节的聚合物加氢的催化剂的种类，讨论了SBS加氢的机理及加氢动力学的研究进展。

This paper presents an efficient method of modelling jointed rock by using the boundary ele-ment method via the concept of multiregion and non-linear model of joint and fault.

边界元法广泛应用于岩石力学问题的最大障碍是岩的非均质及其包含的大量节理断层，本文采用多域思想结合节理断层的非线性模型较好地解决了这一难题。

In the case of invariable of outrigger belt and changing the vertical positional arrangement, the effect on structural inner force, natural vibration period and sidesway were discussed.

分析固定加强层水平伸臂的位置不变，改变环带的竖向位置，研究环带的竖向位置对高层框筒结构力学性能的影响。

Flow chamber is one of the most effective equipment to study the response about blood corpuscle and endothelioid cells under the condition of hemodynamics in vitro.

流动腔装置广泛用于外研究流动环境中的细胞力学行为,是研究细胞粘附及应力与生长关系特性的主要手段之一。

According to the engineering thermodynamic theory,the inflating work and ebulliency work exerted by the materials composed of liquid,vapour and gas during the adiabatic process are calculated.

运用工程热力学的理论计算组成物料的各气、汽、液于绝热过程中对外所作的膨胀功、爆沸功。

An investigation was made on the effect of rewelding on mechanical properties of Ultra-low carbon austenitic stainless steel based on mechanical properties test and microstructure examination.

通过对反复焊接1～5次的超低碳奥氏不锈钢力学性能的试验及金相组织的分析,研究了反复焊接对超低碳奥氏不锈钢力学性能的影响。

Based on the study of the mechanism of biotechnical slope protection,mechanical model were developed in the condition of surface soil reinforced with herb-root in geo-grid.

在对土质路基边坡植被护坡机理分析的基础上,给出了土工格室内草本和木本植物根系加筋土的力学模型。

The analysis of the finite element method using th e axisymmetric model was employed to assess the mechanics behavior of the rubber toughening in mesostructure.

在细观结构上采用典型轴对称单元的有限元分析来预测增韧环氧树脂的力学行为。

In this paper,fluid mechanics was applied to analyze the flow field of swirling jet flow and guide the twisting and untwisting of pneumatic splice.

用流力学分析旋转射流的流场，来指导气流捻接的解捻与加捻。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、扭矩作用。

As is well known the regional tectonic stress field is of great importance to the study of seismogenesis, earthquake prediction and earth dynamics.

区域构造应力场对于研究地震成因、地震预报和地球动力学都具有重要的意义。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔的动态流变参数和结晶动力学过程的变化,间接证实动态挤出聚合物熔分的解缠结作用。