6 Bits are used for the multiplexer and 4 bits are for the burst buffer.

6位用于多路复用器，4位用于突发缓冲。

This is our episodically modular series multiplex.

这是我们按集数划分模块化系列多路复用器。

Multiplexers come in all different sizes, but because we have 16 rows, we need a 1 to 16 multiplexer.

多路复用器有同尺寸，但因为我们有 16 行，所以我们需要一个 1 到 16 多路复用器。

To convert from an address into something that selects the right row or column, we need a special component called a multiplexer -- which is the computer component with a pretty cool name at least compared to the ALU.

要将地址转换为选择确行或列内容，我们需要一个为多路复用器特殊组件——至少与 ALU 相比，这是一个非常酷计算机组件。

Next, the column select multiplexer uses the 10-bit column address to connect the corresponding 8-bit lines to the read driver, which then sends these 8 values and voltages over the 8 data wires to the CPU.

接下来， 列选择多路复用器利用10位列地址， 将对应8位线连接到读取驱动器，后者随即通过8条数据线将这8个数值和电压传输给CPU。

Any questions for terminal multiplexers, or like, tmux concretely?

对于终端多路复用器或具体 tmux 有任何疑问吗？

Instead of eight wires coming out of the multiplexer, we're going to have 128 wires that connect to these 128-bit buffer locations.

与其从多路复用器出来八根线，我们将有128根线连接到这些128位缓冲区位置。

The second one is going to be terminal multiplexers.

第二个是终端多路复用器。

The remaining 10 bits of the address are sent to the column multiplexer.

地址剩下10位被发送到列多路复用器。

But the fact is there are kind of more convenient solutions to this and this is what a terminal multiplexer does.

但事实上，有一些更方便解决方案，这就是终端多路复用器作用。

Next, the column address goes to the multiplexer.

接下来，列地址进入多路复用器。

This multiplexer takes in the 8192 bitlines on the top and, depending on the 10-bit address, connects a specific group of 8 bitlines to the 8 input and output I-O wires at the bottom.

这个多路复用器接收顶部8192条位线，并根据10位地址， 将特定一组8条位线连接到底部8条输入和输出I/O线。

But this time, because a write command was sent, the multiplexer connects the specific 8-bit lines to the write driver, which contains the 8 bits that the CPU had sent along the data wires and requested to write.

但这次， 因为发送了一个写入命令，多路复用器将特定8位线路连接到写入驱动器，该驱动器包含了中央处理器通过数据线发送并请求写入8位数据。

Then it's a row hit, and all the DRAM needs is the column address and the new command, and then the multiplexer simply moves around the open row.

然后就是行命中， 此时动态随机存取存储器只需要列地址和新命令，然后多路复用器只需在开放行中移动数据。

Here's the logic diagram for a simple multiplexer.

这里是一个简单多路复用器逻辑图。