Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带成型工艺流程及装备。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑PVDF具有较注射成型加工性能。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种缩成型而制备，一种半结晶热塑性塑。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片机组成电火花成型机床控制器及其软、硬件配置.

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型机头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑注射成型方法、工艺、设备和模具设计方面问题。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大力和机理也用于压片粘合成型。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

高速混练机、强力混合机、造粒机、橡胶挤押机、滤机、橡胶粗胚成型机、橡塑胶实验机。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑，高等强度和优异电性能，低成本，成型性。广泛应用于各种领域。

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用于皮革、纸板、泡沫、人造革、布塑及合成纤维和非金属材借助于刀模成型裁断。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果影响因素,结果表明,在移膜革生产中,所选用二层皮、着色剂及稀释溶剂是其主要影响因素。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，热导率，耐压强度高，高抗热震，耐侵蚀，耐冲刷，使用寿命长。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用于将封装完毕液体内酯豆腐加热成型及巴氏灭菌。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中空气压力将脱泡泥浆进行注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成型程强化分散混炼方法以及实现这些方法动态混炼挤出机结构及工作原理。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价秸秆为增强材,以淀粉为基体材,模压成型制备出一次性可生物降解花盆。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放架、副放架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收台、电器控制部分等组成。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为结合剂，利用快速成型原理实现了砂轮快速制造。