The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含蜡原油的流具有很大的影响。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土元素之间的关系。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形热处理工艺运用于截齿生产实际的可。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

过热处理后，材的断裂模，而含尘量增加。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并热处理所形成的微孔,对金属原子的吸除作用已为大量的研究所证实。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进热处理，在消除应力的同时，也可能带来一些负面的作用。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆形超标的问题进阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进了探讨,并对焊接接头进了各项能试验,取得了良好的效果。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流的研究表明，成浆煤的低温热处理可以改煤浆的流。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的能进了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效，并从实验上对该工艺进了验证。