1.Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

1.摘要采用十二氟庚醇与双酚A环氧树脂接枝合成了侧链含氟环氧树脂。

2.Can strips of plastic be united with epoxy?

2.塑料带可以用环氧树脂黏合起来吗?

3.For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

3.对于灌装机，我们环氧木重建者混合后，造商的说明。

4.The method and the condition of separation epoxy ethane from dihydric alcohol are discribed.

4.介绍了环氧乙烷与二元醇的分离方法和条件。

5.P154 Multifunctional Ground Attritor applies to mattess and epoxy putty grinding and ground cleaning and wax-polishing.

5.P154型多功能面研磨机,可以用于混面的打磨,环氧腻子层打磨面清洗打腊等。

6.Bisphenol A epoxy resin was modified by polymethyl triethoxy silane (PTS),and a series of high performance PTS-modified epoxy resins were prepared.

6.采用聚甲基三乙氧基硅烷(PTS)化学双酚A型环氧树脂,备出一系列高能的PTS环氧树脂。

7.This paper initially discussed synthesis and modification of tetrafunctional epoxy resin(1,1,2,2- tetrakis(hydroxy phenye)ethane),as well as application in copper clad laminate.

7.对四官能环氧树脂[1,1,2,2-四(对羟基苯基)乙烷四缩水甘油醚]的合成与在覆铜板中的应用作了初步探讨,并对其屏蔽紫外线与产生荧光的机理作用作了简单阐述。

8.The mechanical property and thermal stability of cured epoxy resin were closely related to the chemical structure of hydrogenated terpinene maleic anhydride.

8.氢化萜烯马来酸酐的化学结构与固化物的机械强度热稳定密切相关。

9.The influences of the arylated alkyl amine and conventional polyamide curing agent on the performance of light epoxy antistatic coatings were studied respectively.

9.使用导电云母粉研浅色环氧防静电涂料,不仅导电粉的选择至关重要,环氧固化剂的选择也非常关键。

10.Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

10.以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,备了热固化各向同导电胶。

11.The paper made out the nano-microcapsule theca,by selecting admixture of houttynia cordata thunb extract liquid and pyrethrin as core material,epoxy resin as wall material.

11.确定了用该微胶囊采用浸轧法对毛织物进行抗菌防蛀后整理的工艺。

12.Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

12.采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

13.Epoxy or plastic liming may be cast into the concrete pipe during manufacture;or bitumastic or coal tar epoxy may be painted on the concrete pipe surfaces after installation.

13.可以在造混管道时将环氧和塑胶衬里浇筑在里面，或在安装后用沥青砂浆或煤焦油屠宰混管的表面。

14.43. AQUASOL is a high-performance epoxy resin water based paint. It is a two-component system , supplied in pre-weighted units ready to mix and use on site.

14.高雅素是一种高能,水基环氧树脂保护膜。由两种成分组成,其重量预先按适当的比例配好,可随时混合,立即可用。

15.Results indicate interestingly that the double bond of GMA polymerized with polystyryl carbanion and the molar ratio of epoxy end group and polystyrene oligomer can be adjusted.

15.在GMA与聚苯乙烯阴离子反应的过程中，GMA在活种的终端发生了聚合，所得产物中环氧端基与聚合产物的摩尔比可根据需要进行调节。

16.Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

16.摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

17.In ultrasonic field, authors studied solidify of water base epoxy dope and suspend and decentralization of millicron grain in water base epoxy resin, developed a series of water base dope.

17.超声场条件下,试验研究水基环氧涂料固化以纳米颗粒在水基环氧树脂中的悬浮分散,研出系列水基涂料。