Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通浓缩成型而制备的，一种半结晶热性。

Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经温烧结制成。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟PVDF具有较好的注射成型加工性能。

Shapen technological process and equipment of mold-made synchronous belt is introduced.

介绍模压法橡胶同步带成型工艺流程及装备。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性注射成型的方法、工艺、设备和模具设计方面的问题。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模，等强度和优异电性能，低成本，良好的成型性。广泛应用各种领域。

Intensive Mixer(Banbury Mixer), Kneader Mixer, Pelletizer, Rubber Extruder, Rubber Preformer, 2 Roll Mixing Mill, Lab Machinery.

速混练、强力混合、造粒、橡胶挤押、、橡胶粗胚成型、橡胶实验。

This paper discribes electrosparking machine controller with 8031 SCP and it's implementation of aoftwate and hardware.

介绍由8031单片组成的电火花成型床控制器及其软、硬件配置.

It is mainly used for the forming cutting of fur, paper, leather, synthetize materical and nonmetal material.

主要适用皮革、纸板、泡沫、人造革、布及合成纤维和非金属材借助刀模成型裁断。

It also can fried dumplings, egg roll, samosa, wonton and other foods by changing different forming part.

更换成型头还可以包制锅贴、春卷、咖喱角和馄饨等食品。

The results show that underlayer oxhide,coloring agent and diluent solvent are the important effects of producing transfer-film leather.

研究了移膜革硫化成型效果的影响因素,结果表明,在移膜革生产中,所选用的二层皮、着色剂及稀释溶剂是其主要的影响因素。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加颗粒增大的力和理也用压片的粘合成型。

It is vibrating caulking forming by good quality binder.Good thermal conductivity,high compressive resistance,high anti-heat shocking ,unattackable,abrasion resistance,long service life.

采用优质结合剂，经振动密实成型，热导率好，耐压强度，抗热震，耐侵蚀，耐冲刷，使用寿命长。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材,以淀粉为基体材,通模压成型制备出一次性可生物降解花盆。

Together with the vacuum debubbling barrel, injecting and forming the debubbled mud with the air pressure in the vacuum debubbling barrel.

与真空脱泡桶配套使用，利用真空脱泡桶中的空气压力将脱泡好的泥浆进行注浆成型。

It is used to shape the packaged liquid lactone tofu by means of heating and sterilize it by means of pasteurism.

用将封装完毕的液体内酯豆腐加热成型及巴氏灭菌。

The manual stamping or casting is used to mold eave tile, drip tile, tile with animals, nail head and glassless window.

琉璃瓦中的勾头，滴水瓦件以及走兽、钉帽、花窗和正吻、垂兽等构件采用手工成型或注浆成型。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基动态成型程强化分散混炼的方法以及实现这些方法的动态混炼挤出的结构及工作原理。

It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

设备由主放架、副放架、导向架、成型主、成型模具、校正构、冲孔构、切断部分、收台、电器控制部分等组成。

Aimed at utilization of iron resources in pyritic slag,the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.

为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。