The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.

根据圆弧成形砂轮的修整需要,制了摆动电极式电火花修整装置。

A raw rubber for millable polyether polyurethane elastomer was prepared.

制了一种新型的聚醚型聚氨酯生胶。

Conclusion Unguentum Rhizome coptidis prepared in the paper could be widely used in clinic.

结论所制的复方黄连膏与制工艺具有临床推广应用价值。

A semiconductive shielding layer compound for mine cable has been developed.

简介了矿用电缆半导电屏蔽层胶料的制。

They are working on the perfection of their new paint formula.

他们正在制完善的新颜料配方。

A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂制了一种新型的生石灰消化器。

Their interest localized on the development of this new drug.

他们的兴趣集中在这种新药的制开发上。

On the basis of twenty years' accumulation, Jiangkouchun Group develop a colored liquor, Elide.

江口醇人20年蓄势，精心制的一款有类。

Itisresearching,developing,manufacturing and marketing auto check and measure equipment and realia equipment.

公司主要开发、制、生产汽车检测、学等。

In this paper,a tensiometer developed for cigarette bobbin cutters is introduced.

本文介绍了一种为卷烟纸分切机而制的张力传感器。

In order to treat the flue gas from edge scarfer, the first horizontal Wet-ESP(WSDB)made in home is developed.In the article, the mechanism and key technique is studied and analyzed in detail.

针对火焰清理机烟气排放,制出了首台国产卧式湿式电除尘器(WSDB),并对该类除尘器的除尘机理和关键技术进行了分析究。

Based on a series of tests for the non-metric camera made in China, the development of a lightweight stereocamera and its application and data processing methods are presented in this paper.

本文在对国产非量测摄影机进行一系列试验的基础上,提出了轻便立体摄影机的制及其检校和数据处理方法。

In ultrasonic field, authors studied solidify of water base epoxy dope and suspend and decentralization of millicron grain in water base epoxy resin, developed a series of water base dope.

超声场条件下,试验究水基环氧涂料固化以及纳米颗粒在水基环氧树脂中的悬浮分散,制出系列水基涂料。

A vertical shaft thresher has been developed to meet the need for harvest mechanization in the hilling regions of South China where the double-cropping system (paddy and wheat) is practiced.

针对南方丘陵稻麦两熟地区分段收获机械化的需要，制出立轴式脱粒机。

A new kind of electrotherapeutical instrument is developed based on the theory of interference electrotherapy and 89C2051 system, by use of which, the instrument has been greatly improved.

利用89C2051单片机系统,结合中频干扰电骨伤治疗理论,制出了新一代的小型微电脑骨伤电疗仪。

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

The facility measuring 3D glow curve is mainly consists of a polychromator, linear sample heater and a high sensitive CCD detector which are interfaced to a microcomputer.

在所制的三维发光谱测量系统中，采用内置平面光栅的多仪分光，由联机控温的加热器加热样品。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，制出一种专用钢筋网架焊机。

A novel dust proofing agent for dyestuff was prepared by the addition of industrial fatty acid and glycol epoxide, which could produce a kind of emulsor.

采用工业脂肪酸和环氧乙烷加成法制成乳化剂,进而获得一种新型染料防尘剂。