1.Responser card is made up of SC2262, coupling coil, switch for code.

1.应答器由SC2262、耦合线圈、拨码开关等组成。

2.This will apply more couplant in front of the wheel with less overspray.

2.这种方式，耦合液可以比较均匀散布在探轮之前，不致过。

3.Coupled unsaturated flow in claystone has high effect on strength and stability of underground engineering.

3.非饱和渗流、应力耦合行为是影响粘土类工程岩体的强度和稳定性的重要因。

4.We quantizied the mesoscopic LC circuit, based on the infirmness coupling characteristic of a mesoscopic capacitor .

4.基于介观容存在弱耦合特性,对介观LC路的量子效应进行研究。

5.A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

5.连续式加热炉是个典型具有大惯性、纯滞后、变量、时变并且相互耦合的复杂被控对象,而且有许不确定因。

6.A method for determination of18 impurities in gadolinia by inductively coupled plasmaatomic emission spectrometer are presented in this paper.

6.本文介感耦合等离子体原子发光谱法测定氧化钆中18种。

7.Multiple variable electric hydraulic servo system is a coupling system.By discoupling and pole allocation,we can geta single variable system.

7.变量液伺服系统是一个耦合系统，通过解耦和极点配置，能得到互不干扰的、可跟踪设定值的单变量系统。

8.In this paper,rigid-flexible coupling dynamics of a curvic beam attached with a central rigid body undergoing spatial large overall motion,is investigated.

8.研究带中心刚体的作大范围运动的空间曲梁的刚-柔耦合动力学。

9.Based on coupling control of mechanical motion and liquid flow, an automatable adjusting technology for cell position and attitude was proposed.

9.基于机械运动和流场流动的耦合控制，提出自动化的细胞位姿调节技术。

10.Recent advances and hot spots of bioturbation effect in benthic-pelagic interface were comprehensively reviewed, and the future research trends were prospected.

10.摘要综合评述生物扰动在水层-底栖界面耦合中的作用研究进展和热点问题，并进行展望。

11.They are used in TV, telecamera,audio andvisual recorder,microprocessor and other electronic equipment for resonance ,osilating coupling, delay, filter, trap, choke and etc.

11.用于视机、摄象机、录象机、微处理机和其他子设备中起谐振、振荡、耦合、延迟、滤波、陷波、扼流等作用。

12.The analytical solutions for the stead state equations of four wave mixing with an arbitrary complex coupling constant are given without the undepleted pump approximation.

12.在无泵浦非耗竭近似下，给出复耦合系数为任意值时稳态四波混频耦合波方程组的解析解。

13.In the analysis a 2 dimension element is combined with the boundary punition element(spring element) to calculate stress distribution at the periphery of a tunnel.

13.通过2维与边界罚单（弹簧）耦合分析，可计算出开巷初期巷道周边应力的分布。

14.A method is proposed to exactly diagonalize the Hamiltonian of a N-layer quantum dot containing a single electron in each dot in arbitrary magnetic fields.

14.摘要用精确对角化的方法研究处于外磁场中的N层单子垂直耦合量子点系统，计算基态跃迁随外磁场的变化关系。

15.It is difficult to achieve the synchronization for the master-slave chaotic systems with nonidentical parameters,so the uniform synchronization with a small error bound is discussed.

15.当主从耦合混沌系统的参数之间非恒同时,一般意义上的混沌同步难以实现,因此,讨论其具有一定误差界的一致同步问题.

16.Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

16.研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

17.Based on the theory of interaction of fluid-solid, tridimensional FEM model of dam-aircushion-water is introduced.The vibration isolation mechanism and effectiveness of air cushion has been studied.

17.摘要从流固耦合理论出发，介坝体-气幕-库水隔震的三维有限理论模型，研究气幕隔震的减震机理和隔震效果。

18.Abstract: A network model was developed to analyze a piezoelectric source driving a resonantor to investigate the coupling of the piezoelectric loudspeaker with a thermoacoustic resonantor.

18.为研究压驱动器与热声谐振腔间的耦合特性，建立压驱动系统的网络模拟模型。

19.The key to control flying gage change(FGC) on a tandem cold mill is to deal with the intercoupling between the process variables,such as thickness,stress and so on.

19.冷连轧动态规格变换过程实现控制的主要困难在于冷轧过程中厚度、张力等被控变量之间的相互耦合作用。

20.In this thesis, PCNN models and its actual application of medical image segmentation are studied.The Pulse Coupled Neuromime (PCN) structure and the mechanism of PCNN are discussed.

20.本文研究脉冲耦合神经网络（PCNN）模型及其算法实现，并对其在医学图像分割中的应用做较为全面的探讨。