They're basically pure hydrocarbons soaked in fat. Let's hope the lug nut expands.

基本就是沾满油的纯碳氢化合物，希望轮爪螺母可以膨胀。

What good is that wheel if you lose a nut that holds it on?

如果你失去了一个固定轮子的螺母，那轮子又有什么用呢？

It's burning salsa. I'm hoping the acidity and salinity combined with electricity will corrode the lug nut off.

烧着的莎莎酱，希望酸性和盐度与电结合可以腐蚀部分螺母。

Monofilament nuts are transparent underwater making it easy to trap animals, such as sharks, turtles and seabirds.

单丝螺母在水下是透明的，因此很容易诱捕动物，如鲨鱼、海龟和海鸟。

" Things as simple as a stock three-quarter-inch nut: the world is running out, " Mr Davis says.

“四分之三英寸的库存螺母这样简单的东西在全球都消耗光了。”

Is that enough to melt the lug nut?

这些够融掉螺母吗？

Inserting the correct " key" would let out the nut.

插入正确的“钥匙”会使螺母松开。

I'm basically a bunch of nuts and bolts from the knee down.

我基本上是膝盖以下的一堆螺母和螺栓。

It's all finished. Just a loose wing nut, to be honest.

搞定 实际上 只是螺母松了。

Let's hope the lug nut expands.

希望轮爪螺母可以膨胀。

The nuts and bolts may seem simple, but they add up.

螺母和螺栓可能看起来很简单， 但它们加在一起。

He offered to tighten up the lug nuts for her, but instead he secretly loosened them.

他提出要为她拧紧螺母，但他却偷偷松开了它们。

All I had to do was put four nuts on the bolts that hold the wheels on.

我所要做的就是在固定轮子的螺栓上放四个螺母。

So state governments originally mandated plates as a way to keep track of all the nuts behind the wheel.

因此，州政府最初强制使用车牌是为了跟踪车轮后面的所有螺母。

So we have a nut and a bolt, which go together, and we have a screw.

所以我们有一个螺母和一个螺栓， 它们放在一起，我们有一个螺丝。

He screws up a nut here and there to bring the knives closer to the ground, and tries again.

他在这里和那里拧紧一个螺母， 使刀更靠近地面， 然后再试一次。

So, a bolt, at least one meaning of the word, goes into a nut to hold two things together.

所以，一个螺栓，这个词的至少一个意思，变成一个螺母将两个东西固定在一起。

" Nuts" are something that go around the bolt, and they position the nut and the bolt so it doesn't move.

“螺母”是围绕螺栓的东西，它们定位螺母和螺栓，使其不会移动。

So we have these things called " nuts" and " bolts" -- I know what you're thinking about " nuts" .

所以我们有这些叫做“螺母”和“螺栓”的东西——我知道你在想什么“螺母”。

Now that the jack is lowered and all the lug nuts are snug, you just got to tighten everything in a cross pattern.

现在，针型阀门已经放低了，所有的螺母都在位，你们只要用十字扳手把它们拧紧就好了。