The 3D NAND flash chip accesses that location and sends the contents along the memory channel's 16 traces back to the controller.

3D NAND片访问该位置，并通过内通道的16条迹将内容发送回控制器。

When a button is pressed, the conductive pad on the bottom of the rubber button gasket presses against the contact board, and the gap is bridged, thereby closing the circuit and allowing electricity to run through the traces.

当按钮被按下， 橡胶按钮垫底部的导电垫会压向接触板，从而桥接间隙， 闭合电路，使电流可以通过电路迹。

However, at higher temperatures, diffuse strain appears between the slip traces, leading to a higher average strain in the matrix.

然而，在较高温度下，滑移迹之间出现了弥散应变，导致基体中的平均应变增大。