Some ceramic works of art are shown in this exhibition.

这次展览会上展出一些陶瓷艺术品。

The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

车削氟云母陶瓷对刀具磨损过程与切削属相似。

The process of manufacturing large drawing dies with ceramal fine casting technology was introduced.

介绍采用陶瓷型铸技术制作大型拉伸模工艺。

Piezoceramics telescopic micro-actuator was used in design of micro-gripper of robot.

机器人微操作手设计采用压电伸缩陶瓷微位移器。

The brickmaking,smelting,china,filature, weaving and such handiworks had appeared early in the Ming Period.

早在明代就有制砖、冶坊、陶瓷、缫丝、织布等手工业。

The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍压电陶瓷微动机构的性能特点及在超密车削加工中的多种用途。

The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数磨损率降低。

The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

陶瓷阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适各种气体、液体阀门的密封。

The fabrication processing of unidirectional short carbon and Nicalon fiberreinforced LAS composites was investigated.

研究短纤维增强玻璃陶瓷基复材料制备工艺中的短纤维分散单向纤维预浸片制备。

The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工陶瓷进行车削加工试验,分析切削中的刀具磨损特性,讨论刀具磨损率的因素。

Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶瓷等硬性材料的钻孔。

Ultrafine zircon powder with high purity is a kind of brightening agent in glaze for making high-grade cleaning whiteware.

高纯超细锆英石粉是制造高档卫生洁具陶瓷所用釉料中的乳浊增白剂。

We specialize in producing and selling all kinds of top grade ormolu of decoration, European furniture and daily use.

公司主要生产销售各式高档家居陈设陶瓷、欧美系列家居及日用品。

Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成锆酸锶多孔陶瓷材料。

The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究工艺参数对铝微弧氧化陶瓷层电绝缘性能的规律。

Cupping A treatment inducing local decongestion by a heated cup made of bamboo, porcelain or glass being placed on the body.

拔火罐是以竹筒、陶瓷或玻璃制成的小罐，加热后吸附在身体表面，引起局部充血的一种治疗方法。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述氮化硅陶瓷材料的特点，选择氮化硅陶瓷轴承作为有机硅室温胶搅拌釜底轴承并进行相应设计。

In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进行研究,然后针对桥压法存在的问题提出一种简便而有效的陶瓷材料原生裂纹的预制方法——静态膨胀法。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为提高臭氧发生器的臭氧产量,要求臭氧发生器用的陶瓷基板材料具有较高的介电性能热导率。