齿轮

Gear lubricants may congeal and channel in cold weather.

天气冷时齿轮润滑油可能凝结而形成凹槽。

The teeth on the gears mesh as they turn round.

转动时齿轮上的齿与齿相啮合。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料业平缝机伞齿轮代替钢质齿轮。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建模法。

Ratching in roving.

粗纱成形齿轮。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿轮箱修理及电气系统改造案。

The cogs gear smoothly.

齿轮啮合得很好。

The rope fouled the gears.

绳把齿轮缠住了。

Gear must be properly lubricated.

齿轮必须适当地加油润滑。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿轮箱是抄纸机的典型部件。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘结合课题研究，对某厂煅烧炉传动末级小齿轮自调位装置进行了设计研究。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿轮的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿轮,生产现场求准确、快速地确定其模数以便及时配。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘采用扫描电镜、低倍检验、金相检验、力学试验和化学析等法，析了人字齿轮轴发生劈裂的原因。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级齿轮传动设计浪费了材料的一部承载能力,单目标的啮合参数优化法精确度不够。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿轮。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合齿轮箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计法，并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。

Such as the synchronization counter-rail and pressed compact for the edge smoothing tool,the press plate and wormgear for the line edging tool,the gear and the bear for the washing tool.

用于双边磨边机的同步带导轨、压块，直线磨的压传板、蜗轮，清洗机的齿轮、轴承等。