1.Objective: To optimize the extraction technology of Rhodiola Sacra.
化红景天提取工艺。
2.Objective: To optimize the preparation of ampelopsin from Ampelopsis Cantoniensis Planch.
蛇葡萄素提取工艺。
3.The driveability analysis is a key in the optimized design method for driven pile.
2、基桩可打性分析是打入桩化设计方法关键环节。
4.Aim To optimize and establish the extraction technology of antidepressive substances from Hypericum perforatum L.
目并立翘中抗抑郁成分最佳提取工艺。
5.The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.
采用均匀设计法对对二甲氨基苯甲醛显色法测定桃珊瑚甙显色条件进行了化。
6.This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.
本研究为今后完善温室化设计提供理论依据。
7.Objective: Improve and optimize the method of Chromosome of zooblast.
改进和化动物细胞染色体临时制片技术。
8.To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.
为了化鱼藤酮异构化制备异鱼藤酮工艺。
9.Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.
最后用正交试验方法对肖特基器件后部封装中压焊工艺进行了参数化设计。
10.This article mainly describes the application of the optimized adjustment scheme of Z1S filter wattless compensation in the production.
本文主要论述了珠钢滤波-无功补偿化调整方案在生产中应用。
11.The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.
在通氨同时,将乙醇直接滴入工作炉内,实现气体软氮化,并对工艺进行了。
12.On the other hand, improving the serving environments,such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.
另一方面,改善使用环境,如通过炉型改进化,规范人为操作等措施,以提高其使用寿命。
13.The optimized conditions for phosphorus recovery as hydroxyapatite from wastewater by synthetic tobermorite through seeded crystallization were studied in this paper.
以合成雪硅钙石为晶种,探索了用结晶法以磷酸钙形式回收废水中磷适宜条件。
14.Glycoluril prepared under optimized process conditions has the following good properties of low content of free formaldehyde,durable and stable and crease-proofing.
用化工艺条件制备甘脲树脂,具有游离甲醛含量低、耐久定型、抗折皱良性能。
15.So the absorbing wavelength is selected,the operating condition optimized,and the quantitative and qualitative determination method on Polyoxin B by HPLC-DAD established.
为此择无干扰吸收波长,化测定条件,建立液相色谱—二极管阵列检测器定量及定性检测多氧霉素B方法。
16.An incorporative process in cooking with bleaching of cotton linter pulp with peracetic acid was optimized with orthogonal test and single-factor tests.
17.In addition,the nonintervention condition of screw arris of the stirring shafts is obtained and the screw parameter of stirring shaft is optimized.
②搅拌轴螺棱间不发生干涉,化了搅拌轴螺杆参数。
18.The microstructure of a multiphase material was optimized, and property of auxetic performance was obtained, helping to prove the validity of this method.
以一种多相材料结构为例进行了细观结构化,并获得了具有负泊松比特性,从而验证了所提出方法合理性。
19.It is emphasized that the first flooding surface (FFS) is used as a standard or useful marker in optimizing chronostratigraphic and lithostratigraphic boundaries.
在年代地层方面,进一步强调以初始海泛面(FFS)作为化年代地层“阶”标准。
20.Binding energy and interaction potential of calcium cation and diazine ring are based on the calculation of all the complexes of optimized structures.