These factors represent decenter x, decenter y, compression x, compression y, and angle, respectively.
这些分别代表X 偏心,Y 偏心,X 压,Y压和角度。
These factors represent decenter x, decenter y, compression x, compression y, and angle, respectively.
这些分别代表X 偏心,Y 偏心,X 压,Y压和角度。
In the PC world, archiving and compression usually happen together by using utilities such as PKZIP.
在PC机世界中,归档文件和压文件通常使用PKZIP应用序来压。
Inspection equipment for producing pressure containers, such as tensile ,compression and universal testing machine ,impact machine ,X-ray defectoscope.
抗拉、抗压、万能试验机、击机、X光拍片射线探伤机等制造压力容器检验设备。
From the correlation with foreland basins abroad it is concluded that Sichuan basin resulted from Polydirectional compression stress.
在与国外前陆盆地对比基础上,得出四川盆地是一个受多方向挤压应力综合作用前陆盆地。
Manipuility: South the pine lumber always is needs to carry on the compression treated timber the ideal tree seed.
南方松木一直是需要进行加压防腐处理木材理想树种。
In fact the level of compression created within a regular pulsejet engine is very low, even by automobile standards.
事实上范围内定期pulsejet引擎创建压度很低甚至汽车标准。
Objective:To find a safe, impactful and economical nonoperative treatment in treatmen of thoracic and lumbar compression fracture.
寻找一种安全.有效.经腰椎压骨折非手术治疗方法。
The number of screws in the area of the joint depends solely on the object of refixation with interfragmentary compression.
关节区域螺钉数仅依赖于骨折块间加压再固定目。
Conclusion:The treatment of acupotome can obviously relieve the thebrachial plexus upper trunk of brachiplexnerve compression on scalenus and levator scapula...
小针刀能明显改善臂丛上干神经在斜角肌、提肩胛肌内卡压,缓解疼痛。
Applies the algorithm defined by JPEG standard to digital compression of ultrasonic televiewer images according to the features of logging image.
根据测井图象特点,将JPEG标准算法用于超声电视测井图象压,取得了良好效果。
Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.
采用廉价秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可生物降解花盆。
A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.
塑件外侧两端各有突缘,且内嵌内螺纹嵌件,造成侧凹脱模和嵌件置入困难。
Besides, by using the active biasing circuit (linearizer) for the gate of the FET, the 1dB compression point (CP1dB) can be extended.
除此之外,通过对第二级FET门级偏置使用主动式偏置电路(线性处理器),电路1dB压点(CP1dB)得到了很大提高。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压以及等温涡轮燃烧技术,提出了一种改进概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Methods 88 patients suffered severe open fractures associated with soft tissue crush injuries of the lower leg were treated with monolateral dynamic compression fixator.
方法采用单边动力加压式外固定器治疗小腿严重开放性粉碎骨折88例。
Stress shielding effect of the trihedral fix trough plate,trapezoid compression plate and Tianjin compression plate on the long bone measured with the electrical measuring method.
用电测法测量了三种股骨中段骨折内固定钢板(三面固定槽形板、梯形板、天津板)固定后对骨应力遮挡效应。
The main factor of spring back density is prepressing pressure, next are compression time and compression number of times.The effect of moisture content was not significant.
回弹后密度影响因子主要为压力,其次为加压时间和压次数,而含水率对板坯回弹密度影响不明显。
In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.
在压模塑工艺中,增加预热、预压工序,提高粘合剂流动性和产品物理机械性能。
During two cooling methods, whether tension stress or compression stress, the retained austenite in steel reduced with stress increasing, had become from massive to streak or filminess.
在两种冷却方式下,不论拉应力还是压应力作用,均使组织中残余奥氏体数量减少,形貌由无应力时块状变为条状或薄膜状。
The illinium electrode produces a slim arc when used in welding.With a high level of compression, it has a bigger melting depth in medium and high currents.
钇钨电极在焊接时弧束细长,压度大,在中、大电流时其熔深比较大。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。