模具

We make Storage Facility,Sheet Metal Processing,Mold Frisket,Cable Raceway,Stacker Bed.

本公司专业造仓储设备,免螺丝角钢架,电缆线槽,钢铁板加工,具架,栈板,位于台南.

The microstructure and property of the free cutting unquenched plastic die steels have been studied.

研究了易切削系塑料具钢的组织与性能。

A modified form of sprue gate is also used on underfeed moulds and runnerless moulds.

在点浇口形式的具或无流道具中也用到另一种形式主流道。

The superconduct-heating tube mentioned in this paper is a new technology with good developmentprospect.

提到的使用热超导管冷却具是一项全新技术,很有发展前景。

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成型的方法、工艺、设备和具设计方面的问题。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本具考虑到产量、工厂的设备及塑件的精度要求，选择了一四腔。

The article has described the structure and working principle of multiprocess composite die for automobile deafener closure.

介绍了汽车消声器隔板多工序冲压复合具的结构、工作原理。

Can undertake the design and manufacture all kinds of plastic pipe, heterotypic Mold and wood product processing.

可承接设计造各种塑料管材、异型 材具及产品加工。

We also have:toolmaking department ,silk screen,pad printer,automatic spraying producing line and other facilities.

具厂、注塑机、丝印拉、移印机、激光雕刻机、手工喷油生产线、烫金机等设备。

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

因，师傅技术的好坏将直接影响到具的整体量。

3 Lightly brush six 1 cup-capacity (6cm-diameter base) dariole moulds with a little butter and dust with sugar.

取6个小圆饼具（底部直径6厘米，容量为1杯），在里面轻刷一层黄油，上面撒上糖。

Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

冷镦圆头凹是冷镦螺栓生产过程中的关键具。

It has conquered the old method in machining the pipe of bus frame, which depend on aptotic mould formerly.

克服了依靠固定具仿形加工车辆骨架弧度管方法的缺点。

Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated.

介绍了清净管体注射的设计与造方法,并阐述了具的工作过程。

The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了零件的排样设计方案、具结构及主要特点。

Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.

摘 要: 冷镦圆头凹是冷镦螺栓生产过程中的关键具。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上具中心的整。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

We have ensured our products’ trimness in appearance and excellence in quality through a centralized management system of storing finished mold products.

统一的具存放管理措施，保证具外观上的整洁及品上的精准。

Good experiences of plastic, sheet metal and magnalium alloy parts design - Good knowledge of injection mold, stamping die and die-casting mold.

★ 熟悉塑胶材料及其具，熟悉钣金冲压及其具，熟悉镁铝合金的压铸工艺和结构设计。