阳极

The heat sinker adopts refined aluminum-alloy with anodize process on the surface.Pure color.

散热体采用铝合金，表辅以处理。

All renascent oxygen is consumed for oxidizing metal anode to form metal oxide film.

当形成足够厚的氧化膜后， 的氧化速度减慢， 表才析出氧气。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电、糊、保护渣等。

To improve the anti-corrosion performance of electrocoating,organic andinorganic inhibitors are applied in an anodic electrophoretic-coating.

在电泳涂装工艺中使用缓蚀剂，可提高电泳涂层的防腐蚀性。

Application of anodic electrocoating including pretreatment, bath composition and quality control is decribed.

论述电泳涂装的工艺,包括前处理、电泳液成分、质量控制等.

The lamp cup is made from Germany-original anodic alumian of high purity, featuring long life and durability.

灯杯采用高纯铝雾氧化处理，久耐用。

The design parameters of anodic protection coolers and the reason why to choose a prepump process are presented.

介保护浓硫酸冷却的设计参数,选用泵前流程的原因,重点讨论冷却水路的设计方案。

The key of this technology depended on increasing batteries positron electrode -- zincous -- the electron that can carry.

这项技术的重点在于增加了电池正电子电————所能携带的电子。

Various uniform and gentle colors such as brown,golden-yellow,golden-green and skyblue were put on aluminum surface via a variety of coloring methods.

论述了铝件氧化着色工艺及着色的影响因素。

The key technology and technics,which use Simons electrolyze trough with a falcial anode to synthesize lithium fluoroalkylphosphates,are discussed in this paper.

本文探讨了采用以镍板为的西蒙斯电解槽电解氟化制备氟烷基膦酸锂的有关工艺和关键技术。

This paper introduces an improved porcelainous anodic oxidation and analyzes the effect of different process parameters on quality of oxide films.

本文主要介了一种改进后的瓷质氧化工艺,并就各种工艺参数对氧化膜的影响进行了分析。

Based on different soil corrosion factors and pipe corrosion principle, obligated current negode protection and sacrifice anode protection can be used here.

根据不同的土壤腐蚀因素以及管道腐蚀原理，可以采用强制电流阴保护和牺牲的阴保护。

Anionic electrodeposit coating line for aluminum shell of solar water heater is introduced.Anodic oxidation,anodizing electrolytic coloring and anionic electrodeposit coating process are focused.

介了太能热水器铝材壳体电泳涂装线设备,重点详述了氧化、电解着色和电泳涂装工艺。

This paper introduces the technical condition of electrorefine high-nickel and high-sulphur copper anode and analyzes the problem and the reason in the practise.

介了高镍高硫铜电解的技术条件,分析了电解过程中产生的问题及其原因,提出了解决的对策。

Moreover, it was feasible to reduce the oxidation of the alkynol brighter by choosing active nickel as the anode in the bright nickel electroplating.

选择活性镍作为光亮镀镍，可以减少炔醇类光亮剂的氧化。

The picoammeter reads the current at the last dynode, which is equal to the anode current minus the current flowing to the previous dynode.

皮安计在最后一个倍增管电处读取电流，此电流等于电流减去流过前一个倍增管电的电流。

The selective oxidation of ethers by chromic reagent, peroxide, nitric acid, oxygen and ozonide, as well as the ethers anodic oxidation are particularly introduced.

主要介了铬(Ⅵ)类试剂,过氧化物、硝酸、氧和臭氧等各类氧化剂对醚选择性氧化以及醚的电氧化研究状况。

An annular cavity placed around the anode of arcjet was designed to form a regenerative cooling channel on the base of an arc jet.

该文在原有电弧加热发动机基础上进行改进，设计了覆盖发动机的环形空腔，形成再生冷却通道。

The process of decoppering through insoluble anode electrolysis in the solution produced by leaching high grade matte nickel using chlorine is intro-duced in this paper.

本文介了氯化浸出高冰镍溶液采用不溶电解脱铜的方法。

The structure of the MIGmust be carefully selected, as the tiny change on it will affect beam performance highly, and beam current will fluctuate punily.

同时，还发现由于结构的变化导致阴电场分布的变化，使电子注的注电流在各因子变化过程中出现了微小的扰动。