固化

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后轮胎花纹清晰,无气泡和缺料现象。

The invention relates to thermocuring isotropic conductive adhesive and a preparation method thereof.

本发明涉及一种热固化各向同性导电胶及其制备方法。

Conclusion Indwelling hepatoma after MTC treatment could activize the anti tumor immunity of the patients.

结论微波固化后留置可以刺激宿主抗肿瘤免疫力。

The applications thereof in UV curable coatings and photolitho inks are reviewed.

综述了其在UV固化涂料和胶印油墨上应用。

This paper introduces the main characteristics of SL304 photogelatin for rotary screen stenciling which can quickly cure at lower temperature.

介绍了SL304中温速固化圆网制版感光胶主要性特点。

Self-preparation polymerizable macromolecular surfactant HTP and acrylate monomer were used to prepare the amphiphilic polymer by soap-free microemulsion pentamer copolymerization.

以自制可聚合大分子表面活性剂HTP与丙烯酸酯类单体进行无皂微乳液五元共聚,制备可热固化双亲聚合物。

The sphene is a kind of stable mineral which is widely used in solidifing actinides separated from high level radioactive waste.

摘要榍是一种稳定矿物，是人造岩固化高放射性废弃物较理想基材之一。

The mechanical property and thermal stability of cured epoxy resin were closely related to the chemical structure of hydrogenated terpinene maleic anhydride.

氢化萜烯马来酸酐化学结构与固化物机械强度及热稳定性密切相关。

The effects of isocyano-content, the amount of catalyst and the proportion of resin to curing agent on the product properties were discussed.

讨论了异氰酸根含量、催化剂用量,以及树脂和固化剂配比对产品性响。

It is found that incorporation of a trifunctional carboxylic ester or silane coupling agent can improve the adhesion of coatings on glass.

实验发现加入一定量三官团酸酯或硅烷偶联剂可以显著提高紫外光固化玻璃涂膜对玻璃附着力。

The influences of the arylated alkyl amine and conventional polyamide curing agent on the performance of light epoxy antistatic coatings were studied respectively.

使用导电云母粉研制浅色环氧防静电涂料,不仅导电粉选择至关重要,环氧固化剂选择也非常关键。

Pei-Chi Chang, Sheng-Jye Hwang, Huei-Huang Lee, Durn-Yuan Huang, "A Study on the Adhesion Between EMC and IC Encapsulation Mold", Automation Conference, P180 (2003).

张祥杰,黄圣杰,李辉煌,黄登渊,“电子构装材料之压力体积温度及固化反应之研究”中国工程师学会第20届全国学术趼讨会论文集,(2003).

Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

以环氧树脂为基体,间苯二胺和二氨基二苯甲烷低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

Conclusions:Light cure pit and fissure sealant technique can be used to treat pit and fissure caries after the cariated dentin has been cleared up.

在彻底清除龋坏牙体组织后用光固化窝沟封闭术可以做为磨牙牙 合面窝沟龋预防治疗方法之一。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为结合剂，利用速成型原理实现了砂轮速制造。

Radioactive nuclides are solidified at crystal lattice as one part of crystalloid by zirconolite-rich synroc, which greatly enhances the long-term safety of radioactive waste disposing.

富钙钛锆型人造岩将放射性核素固定在其晶格中作为晶体一部分固定起来,大大提高了放射性废物处置长期安全性,是固化高放射性废物理想固化介质。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合制得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。